收藏本站
Page 2
4.0
4.1
4.1.1
4.1.2
4.2
4.2.1
4.2.2
4.3
SPECIFICATION RT-510 ISSUE 12
Quality Assurance Provisions
Classification of Tests
Qualification Tests
Qualification tests are those performed on tubing submitted for qualification as a satisfactory product and
shall consist of all tests listed in this specification.
Acceptance Tests
Acceptance tests are those performed on tubing submitted for acceptance under contract. Acceptance tests
shall consist of the following:
Dimensions
Longitudinal Change
Tensile Strength
Tensile Stress
Ultimate Elongation
Heat Shock
Flammability
Low Temperature Flexibility
Physical property tests performed at this time qualify subsequent sleeving lots produced from the same
batch of compound. Statistical process control data may be used to demonstrate conformance for
dimensions.
Sampling Instructions
Qualification Test Samples
Qualification test samples shall consist of 50 feet (15 m) of tubing of each size. Qualification of any size
within each size range specified below will qualify all sizes in the same range.
Size Range
1/8 through 7/8
1 through 4
Acceptance Test Samples
Acceptance test samples shall consist of not less than 16 feet (5 m) of tubing selected at random from each
lot. A lot shall consist of all tubing of the same size, from the same production run and offered for
inspection at the same time.
Test Procedures
Unless otherwise specified, tests shall be performed on specimens which have been fully recovered by
conditioning for 10 minutes in a 175 ± 5°C (347 ± 9°F) oven. All ovens shall be of the mechanical
convection type in which air passes over the specimens at a velocity of 100 to 200 feet (30 to 61 m) per
minute. Tubing shall be allowed to cool to room temperature prior to testing. The Heat Shrinkable
Sleeving and Measurement Gages shall be at room temperature with ambient relative humidity prior to
testing before or after heat shrinking.
If this document is printed it becomes uncontrolled. Check for the latest revision.
? 2005-2010 Tyco Electronics Corporation. All rights reserved
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
NT-MIL-3-0-SP HEAT SHRINK TUBING
NTD2425-10 RELAY SSR AC OUT 240VAC 25A PNL
NUD4001DEVB EVAL BOARD FOR NUD4001D
NXN1.75GN NOMEX SLEEVING 1 3/4" GREEN 100'
NY PMS 102 0050 PH SCREW MACH PHIL 10-32X1/2 NYLON
FX2C1-68P-1.27DSAL(71) 板对板与夹层连接器 68P STRAIGHT HEADER T/H NO CLN PCB LK CL
OAA160PTR RELAY OPTOMOS 50MA DP-NO 8FLTPK
OAA160S RELAY OPTOMOS 50MA DP-NO 8-SMD
相关代理商/技术参数
NT-3/8-0-SP 功能描述:热收缩管和套管 HS-TUBING .375" BK PRICE PER FT RoHS:否 制造商:3M Electronic Specialty 类型:Tubing 材料:Polyolefin, Flexible 颜色:Clear 最低收缩温度:+ 100 C 恢复直径: 长度:100 ft 内径:1.5 in 收缩率:2:1
NT-3/8-0-SP-CS5002 制造商:TE Connectivity 功能描述:NT-3/8-0-SP-CS5002
NT-3/8-0-SP-CS5338 制造商:TE Connectivity 功能描述:NT-3/8-0-SP-CS5338
NT-3/8-0-SP-CS6327 制造商:TE Connectivity 功能描述:NT-3/8-0-SP-CS6327
NT-3/8-0-SPCUT 76MM 制造商:TE Connectivity 功能描述:NT-3/8-0-SP
NT300 制造商:LUMINIS 制造商全称:LUMINIS 功能描述:Wall mount
NT302MI 制造商:未知厂家 制造商全称:未知厂家 功能描述:FREQUENCY-TO-DIGITAL CONVERTER
NT-306 制造商:Pro'skit 功能描述:Volatage Detector